iSEVEN Ri7 Data Cabinets are designed to provide an unbeatable value and quality for the price. These are universal cabinets with a load capacity of up to 800 kg.
The iSEVEN Ri7 cabinet is designed to provide an unbeatable ratio between price, utility, and quality. Ideal for installers and end customers who want to spend less time choosing between different options.
After meticulous research, we have prepared a portfolio of the most requested formats with a universal design and a limited set of options. iSEVEN is intended for use in server rooms, telecommunication exchanges, as well as as a stand-alone unit. The 19"" iSEVEN Ri7 data cabinet satisfies all requirements for safe installation of active elements, cabling, air ventilation and power supplies. The set of options is reduced compared to the configurable PREMIUM cabinets.
| Nom de la ligne de produits |
ISEVEN RI7 |
|---|---|
| Bestseller |
Universal cabinet |
| Hauteur (U) |
27, 42, 15, 21, 45, 48
|
| Largeur (mm) |
600, 800
|
| Profondeur (mm) |
800, 1000, 600, 1200 upon request
|
| Limite de charge (kg) |
800 |
| Montants |
2 pairs of sliding 19" L rails |
| Couleur |
RAL7035 or RAL9005 |
| Portes avant et arriere |
4 types of doors (type G, S, P and W) available for front or rear installation and 1 type of rear panel. Door opening angle 180°, easy-to-switch opening direction, hinged handle with exchangeable DIN profile |
| Panneaux latéraux |
Easily removable, equipped with a lock |
| Informations techniques |
Other configurations are also available, for more information see the attached Data Sheet |
| Plateau supérieur |
Openings for the ventilation unit and cable inlets, breakout design, the number depends on the base format |
| Plateaux supérieurs et inférieurs |
Openings for the ventilation unit and cable inlets, breakout design, the number depends on the base format |
| Pieds et roulettes |
Adjustable feet, castors and braked wheels |
| Indice IP |
IP30 |
| Configuration standard |
2 pairs of vertical 19"" sliding L rails, marking of individual installation positions including position number, |
Suitable for the most demanding conditions and use cases, the cabinet is based on a high-strength frame laser-welded from a patented profile. Thanks to this, the RF1 achieves maximum frame rigidity and a load capacity of up to 2,000 kg.
Ventilation units and fans are used to cool the equipment in the cabinet using air drawn from the room. Suitable primarily for lower heat loads.
Ventilation units and fans are used to cool the equipment in the cabinet using air drawn from the room, being notable primarily for their low power consumption.
Ventilation units are used to cool the equipment in the cabinet using air drawn from the room.
A monitoring device with a height of 1U supporting up to 150 sensors, suitable for multiple cabinets or server rooms. Also available in a GSM version.
Ramos Plus is the smallest model from the RAMOS intelligent monitoring device series.
RAMOS Micro is a simple compact solution for monitoring of rack cabinet environments.
The main control and monitoring device for the RAMOS ACS centralized access system.
Panels 1 to 3U high, one-sided or double-sided design for safe routing of the maximum number of patch cords into vertical panels.
Panels 1U to 3U high, for safe routing of the maximum number of patch cords into vertical panels. The extended version will allow for an almost double capacity.
Vertical high-density binding panels for rack cabinets, used for safe routing and connection of patch cords running between horizontal panels.
Vertical high-density binding panels for rack cabinets, used for safe routing and connection of patch cords running between horizontal panels. An extended version will allow for nearly double capacity.
Binding panels with plastic loops are used for installation and horizontal routing of cables within the cabinet.
Plastic binding ducts are intended for placement and horizontal routing of cables in rack cabinets, wall-mounted and SOHO cabinets.
Binding panel with metal loops, single-sided design only
The brackets are designed for the installation of vertical binding panels and cable loops in 800 mm wide cabinets.
Binding ducts are designed to be installed on 19" rails and intended for placement and horizontal routing of cables in rack cabinets.
Wired cable channels are used for cable routing in PREMIUM and iSEVEN series rack cabinets.
Side perforated binding panels are used for vertical cable routing in rack cabinets.
Managed power panels enable remote monitoring of energy consumption at the input as well as at individual sockets, including their control.
Monitored power distribution units enable remote monitoring of power consumption at the input as well as at individual sockets.
Basic power panels are used for power supply and its distribution to individual IT devices in cabinets.
The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.
The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.
A unique combination of 19" rails with many advantages.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.
Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.
Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.
Holders are intended for holding a keyboard or monitor. A drawer is designed to store drawings, technical documentation, etc. directly in the cabinet.
Optical trays are used to terminate optical cables in the cabinet. We also offer various types of modular panels and other optical accessories.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
All cabinet doors are fitted with a locking mechanism. This ensures protection against unauthorized access to the installed equipment.
Plinths are used as an aesthetic and stabilizing element of rack cabinets. This is an alternative to the standard height-adjustable legs or optional castors.
All CONTEG cabinets include a basic grounding kit in the standard configuration.
In the standard configuration, CONTEG rack cabinets are supplied with height-adjustable feet. Optionally, the feet can be replaced with castors or plinths.
The mounting kit is used to attach 19" technology to vertical rails with this spacing.
Linings for sharp edges of cable inlets. Anti-dust plugs significantly reduce the amount of dust entering the cabinet.
Patch panels are attached to 19" vertical rails and allow the termination of data or telephone cables to different types of modules.
3 types of patch panels
Accessories for SOHO Mini REH - binding panel.
including the door contact, enables direct connection to the intelligent port of the RAMOS Optimax or RAMOS Plus main monitoring unit.
Door wall-mounted biometric reader for face recognition with multi-format RFID reader.
Keyboard with built-in card reader (EM format) for RAMOS ACS access system.
Electronic handle for RAMOS ACS access and monitoring system.
Electronic handle with built-in card reader for RAMOS ACS access and monitoring system.
A 1-phase or 3-phase inline power meter with a backlit display is suitable for measuring parameters at the input of the basic power supply panel.
For vertical installations of power panels in cabinets, it is necessary to order the appropriate brackets for the basic, monitored or managed PDU, which is not included in the package.
Luminaire with rocker switch for lighting the interior of FSE and FSM cabinets
Cage nuts, screws, hinges, brackets, fasteners
